GLUE NOT REQUIRED!!! CAN BE DISASSEMBLED FOR TRAVEL!
These kits are super easy to assemble in about 2 minutes. All you need to do in interlock the parts and attach the motor. Then attach the rotating arm of your choice, usually a PVC pipe. The best way is to use the brass adapter that we have available on our site. But there are other methods available on the internet.
To get the motor, check out the links below.
Our 2.0 Cup Turners are a custom compact design that is laser cut with a high quality wood fiberboard. Once assembled, these turners are super sturdy and very quiet. They are also adjustable in length.
This design is precut and compatible with not only rotisserie motors with the plastic housings, but also the un-housed motors that are sold on Amazon for about $7.00. So you now have a choice on what motor you want to use. Typically you are going to want a motor that spins at around 2.5 to 3 RPM's.
Here are your two options for motors below, either of these types will work, but the motor without the housing will need to be wired. The rotisserie motor type is wired and just has to be slightly disassembled to install the brass adapter for attaching the PVC pipe parts.
Option 1: Easiest option
For the motor you will need to purchase it separately, WITH HOUSING AND POWER CORD: https://www.glitterchimp.com/products/bbq-rotisserie-motor-with-enclosed-housing
Option 2: Medium Difficultly, wiring required
WITHOUT HOUSING OR CORD, DIY WIRING: https://www.amazon.com/Ewead-TYC-50-AC100-127V-Synchronous-8Kgf-cm/dp/B07CH4HNXB
For arms/wands. Just use a schedule 40 1/2" PVC pipe coupling from Lowe's or Home Depot and a 1/2" PVC pipe. You can usually make two PVC arms for about $2.00. Here is the product commonly used: https://www.lowes.com/pd/LASCO-1-2-in-x-PVC-Sch-40-Coupling/3228010
Have you used Glitter Chimp glitter to make something amazing? Share a picture here!