These kits are super easy to assemble in about 2 minutes. All you need is a Phillip's head screwdriver, a knife, and a 5/64 or 2mm hex key, also known as a Alan wrench.
GLUE NOT REQUIRED!!! CAN BE DISASSEMBLED FOR TRAVEL!
To get the motor, check out the amazon links below.
Our 2.0 Cup Turners are a custom compact design that is laser cut with a high quality wood fiberboard. Once assembled, these turners are super sturdy and very quiet. They are also adjustable in length.
This design is precut and compatible with not only rotisserie motors with the plastic housings, but also the un-housed motors that are sold on Amazon for about $7.00. So you now have a choice on what motor you want to use. Typically you are going to want a motor that spins at around 2.5 to 3 RPM's.
Here are your two options for motors below, either of these types will work, but the motor without the housing will need to be wired. The rotisserie motor type is wired and just has to be slightly disassembled to install the brass adapter for attaching the PVC pipe parts.
Option 1: $19 to $21 Easiest option
For the motor you will need to purchase it separately, Amazon seems to have best prices here: WITH HOUSING AND POWER CORD: https://www.amazon.com/dp/B00X7RKCC4/ref=cm_sw_em_r_mt_dp_U_vc06CbG6183HG
Option 2: $7 to $8 plus wiring parts.
WITHOUT HOUSING OR CORD, DIY WIRING: https://www.amazon.com/Ewead-TYC-50-AC100-127V-Synchronous-8Kgf-cm/dp/B07CH4HNXB
For arms/wands. Just use a schedule 40 1/2" PVC pipe coupling from Lowe's or Home Depot and a 1/2" PVC pipe. You can usually make two PVC arms for about $2.00. Here is the product commonly used: https://www.lowes.com/pd/LASCO-1-2-in-x-PVC-Sch-40-Coupling/3228010
The assembly video can be found here:
Have you used Glitter Chimp glitter to make something amazing? Share a picture here!